Beschrijving
Dorch Stage 1 HPFP Upgrade BMW 140i / 240i / 340i / 440i / 540i B58
After months of R&D we have finally released the world’s first B58 HPFP upgrade! This is a complete plug-and-play kit to support up to 600whp (this number can vary quite a bit depending on tuning strategy and the blend of ethanol*). There’s no cutting, no bending, no crimping, etc. This kit drops right in with full control from the DME, just like the OEM pump. All of the safety and sophistication of the stock DME remain in place.
B58 HPFP Flow Capacities:
The table below serves as a reference for maximum fuel flow in cubic centimeters per camshaft revolution for various B58 fuel pump options. These calculations are based on the B58 cam lobe. Each engine will have varying fuel flow capacities depending on the lift and number of lobes on the camshaft.
| Pump Model | Fuel Flow (cc/rev) |
|---|---|
| HDP5 Evo (Stock B58) | .954 |
| HDP6 (Stock B58TU) | 1.178 |
| Dorch Engineering Stage 1 | 1.299 |
| Dorch Engineering Stage 2 | 1.558 |
Software changes are required to run this pump. If using Bootmod3, MHD, or MG Flasher, simply check the box for our pump upgrade when flashing. Otherwise, please send your .BIN file to tuning@dorchengineering.com for the appropriate software changes. This change is free of charge for all of our customers.
*Full E85 is tuner-dependent, but we typically recommend our Stage 2 HPFP Upgrade kits
Kit Contents:
- HPFP w/ Hardware
- High Pressure Line
- Quick Connect Low Pressure Line
- Low Pressure Line Bracket
- Plug-n-Play Adapter Harness
BMW 1-SERIE F20/F21 140I
BMW 2-SERIE F22/F23 240I
BMW 2-SERIE F87 240I
BMW 3-SERIE F30/F31/F34 340I
BMW 3-SERIE F80 340I
BMW 4-SERIE F32/F33/F36 440I
BMW 4-SERIE F80/F83 440I
BMW 5-SERIE G30/G31 540I
BMW 6-SERIE G32 640I
BMW 7-SERIE G11/G12 740I
BMW X3 G01 M40i
BMW X4 G02 M40i